ADI® Goldfinger bits were designed for engineered stone, but they also work well on granite. The Goldfinger has three large segments for extended wear. All ADI finger bits are quality engineered and manufactured in Italy.
- Long life segments
- 3 Segments
- For use on engineered stone or granite
- A break-in period is required for the Goldfinger. Run at 60% of maximum feed rate and 80% of its maximum RPM for the first 200MM of material
- Made in Italy
Product Attributes
| Diameter | 22mm |
| Diamond Bond | Sintered |
| Feed Rate | 250-300mm/min |
| Material | Granite, Engineered Stone |
| Length | 35mm |
| Number Of Segments | 3 |
| RPM | 5,300-5,800 |
| Weight | 0.47 lbs |
