The KEEP-NUT™ Setting Tool or Insertion Tool is used to insert the KEEP-NUT™ press-in self-anchoring inserts into the pre-drilled hole created by your CNC or Manual Bit. By screwing on the KEEP-NUT™ into this tool you are then diffusing the impact of your mallet or hammer into the stone.Tip: After inserting the KEEP-NUT™ press-in self-anchoring inserts, use the Go/No Go Gauge to bottom out the KEEP-NUT™ guaranteeing full pull strength out of the KEEP-NUT™.
Product Attributes
| Weight | 1 lbs |
